Predicting recordable injuries with SafetyDNA®

Assess individuals’ likelihood of unsafe behaviour and risks of incidents

Challenge

 

Not all work-related injuries are the same. A small cut that requires no more than antiseptic and a plaster and a serious cut that causes tendon damage, requires 50 stitches and five days of rest plus another month of restricted work are both injuries. The former, however, is not considered to be an OSHA recordable incident whereas the second one would.

According to data from the U.S. Bureau of Labor Statistics, slightly more than one half of the 3.7 million private industry injury and illness cases reported nationally in 2010 were of a more serious nature that involved days away from work, job transfer, or restriction – commonly referred to as DART casesi. In other words, over 50% of all injuries were severe enough to lead to loss of work, restricted duty upon return and/or transferring out of the original job.

While there are many factors that contribute to safety incidents, it’s clear that some individuals are more likely to engage in high risk, unsafe behaviours than others. For instance, 20% of drivers account for almost 80% of all driving accidentsii. That 80/20 pattern is similar to what is found in other industries for negative behaviours, including safety. As an employer, the key is to have an accurate way to identify those high-risk individuals early in the hiring process before they become employees.

Solution

The SafetyDNA® assessment was developed specifically to assess an individual’s likelihood of unsafe behaviour and elevated risks of safety incidents. The assessment is based on the SafetyDNA four factor model.

The assessment, along with its accompanying Insight Workshop, is primarily used as a development tool to help current employees gain insight into their safety risk factors, thus increasing awareness and changing behaviour. However, it can also be used as an effective up-front filter in the hiring process to screen out high-risk candidates before they enter the organisation. This paper focuses on the accuracy of the SafetyDNA assessment at identifying individuals in that high-risk category and the impact on actual safety outcomes.
As part of a larger study, we administered the SafetyDNA assessment to a group of 796 hourly employees from three different organisations representing oil and gas, paper products manufacturing and construction materials manufacturing. Information was obtained regarding the number of safety incidents as well as the severity of those incidents over a 36-month period.

Decoration

Results

As a pre-employment screening tool, the assessment provides a final category rating based on a composite of the three safety factors: At Risk, Monitor for Compliance, and Safe.

Out of the 796 individuals tested, there were 179 safety incidents; 60 of those resulted in injury and 37 of those injuries were serious enough to be considered OSHA recordable injuries. Figure 1 shows the percentage for individuals in each SafetyDNA risk category who were involved in an incident that resulted in an injury. The gold bar in Figure 1 shows the percentage for all injuries (both minor and serious) and the blue bar represents the percentage involved in OSHA recordable (serious) injuries. As compared to the those categorised as Safe, individuals in the At Risk group were injured 4 times as often (4% compared to 16%), and injured seriously (OSHA recordable) 11 times as often. Additionally, in our sample, almost half (43%) of the OSHA recordable injuries involved individuals in the At Risk group.

Because safety incidents do not always result in someone being hurt (e.g. near miss) or hurt seriously enough to be OSHA recordable, we looked more closely at serious injuries and incidents within each SafetyDNA category. When someone in the At Risk category was involved in a safety incident, 46% of the time, it resulted in a serious injury. This is in comparison to 28% for Monitor for Compliance and 4% for the Safe category.

injury involvement by safetydna category
incidents resulting in serious injury by safetydna category graph

Summary

These are powerful, statistically significant findings. Individuals in the study worked alongside each other in a wide range of positions, performing similar work, with the same supervisors. Yet, those identified in the At Risk category by the SafetyDNA assessment were 11 times more likely to be involved in incidents resulting in OSHA recordable injuries. Identifying At Risk individuals early on in the selection process could have eliminated almost half of all work-related injuries in these organisations.

i USDL-11-1502, 20 October 2011
ii Knipling, R.R., Boyle, L.N., Hickman, J.S., York, J.S., Daecher, C. Olsen, E.C.B., Prailey, T.D. (2004). CTBSSP Synthesis Report 4: Individual Differences and the “High-Risk” Commercial Driver, Commercial Truck and Bus Synthesis Program. Transportation Research Board, National Research Council, Washington, D.C.